Flake ice machine Tube ice machine Block ice machine |
1. The control system is Siemens PLC, fully automated production, no manual operation.
2. The equipment can be used with stainless steel ice storage bins or polyurethane ice storage bins, and a wide range of accessories are available.
3. The flake ice machine is a device for direct low-temperature continuous ice making, and the ice temperature is as low as -8 °C or lower, and the efficiency is high.
4. Flake ice is an irregular piece of ice, which is dry and clean, has a beautiful shape, is not easy to stick together, and has good fluidity.
5. The thickness of flake ice is generally 1mm-2mm, and it can be used directly without using a crusher.
|
|
Voltage：
380
|
|
|
Voltage：
380
|
Application:
Mainly apply for human consumption such as freeze drinks, mix wines, cool food stuffs, and industrial sphere like chemical cooling, food processing, fisheries, poultry-processing, meat plants etc.
Evaporator:
Use high quality stainless steel for all water and ice contact surfaces providing corrosion resistance.
Cutter:
Stainless steel cutters driven by gear motors are uniquely designed to produce both cylindrical and crushed ice simply by reversing the motor control.
Automatic control:
Use the automatic electrical system make machine running and help customers operation and settle the in case trouble.
|
|
Voltage：
380
|
|
|
Voltage：
380
|
|
|
Voltage：
380
|
|
|
Voltage：
380
|
1. Energy saving：Each ton block ice only need 60 degrees electricity, can save 30% power than the traditional salt block ice machine.
2. More automatic design：Add water, ice making, ice drop etc., all the steps can do by automatic, saving human work more.
3. Faster ice freezing：The same size and weight ice block, this direct cooling block ice machine can save 3 to 6 hours than the slat block ice machine, and the freezing temperature of salt ice machine around -10℃, but direct cooling machine is around -20℃.
4. Operation cost low：As the direct cooling block ice machine, no need salt water, it can save lot of mould costing, and the mould is aluminum alloy with longer use life.
5. Smaller space：The direct cooling block ice machine need smaller space, and can easy operate after finished assemble water and electricity, save a lot of costing.
6. More clean:The direct block ice more clean can be eat directly.
7. Easy for transport：The ice block can easy transport in unit or separate.
8. Longer use life：As there is no salt corrosion, the ice mould with longer use life.
|
|
Voltage：
380
Refrigerant：
R22/R404A
|
|
|
Voltage：
380
Refrigerant：
R22/R404A
|
|
|
Voltage：
380
Refrigerant：
R22/R404A
|
|
|
Voltage：
380
Refrigerant：
R22/R404A
|
|
|
Voltage：
380
Refrigerant：
R22/R404A
|
|
|
Voltage：
380
Refrigerant：
R22/R404A
|
|
|